Fishing Chains
Fishing chains have three specifications: short link chian, middle link chain and long link chain. Different types of fishing chains have different features.
Products
hot-sale products
-
-
Stud Link Anchor Chain Fish Chain
Stud link anchor chains are a type of heavy-duty chain commonly used for anchoring and mooring vessels. They have a central stud in each link that helps to prevent kinking, deformation, and fouling. These chains are known for their strength and are often preferred for large vessels and applications where significant loads are involved.
-
Dual Shank Anchor
The dual shank anchor features two parallel shanks that work together to embed and hold in various seabed conditions. This design provides higher holding power than traditional anchors, especially in soft ground and mud, and is commonly used in aquaculture and swing moorings.
-
High Strength aquaculture Mooring Shackle
Mooring shackles are manufactured with alloy steel by following ISO9001 Quality Control System. With our years know-how on forging, heat treatment and hot dip galvanized, it is ensured the mooring shackle avoid any Hydrogen Embrittle-ment and offer a longer fatigue life of safe performance compared to EN13889 requirement and safety.
-
Mooring Plate for Aquaculture
Mooring connection plates are manufactured using alloy grade material and followed by full heat treatment process.The durability ensures that the plates can withstand exposure to saltwater, reducing maintenance needs and extending the lifespan of the aquaculture setup.
-
AM3 Stud Link Anchor Chain
Sinostar Marine is a manufacturer of AM2/AM3 stud link anchor chains.Can provide LR, DNV, CCS, ABS, BV and other classification society certification.
-
AM2 Stud Link Anchor Chain
Stud link anchor chain AM2 is a specific type of anchor chain widely used in marine applications. It's characterized by having a stud (a crossbar or bar) within each link, adding strength and preventing kinking or twisting. AM2 is a designation within the marine industry for a specific grade of this chain, indicating its strength and material properties.
-
HDG Studless Anchor Chian
Anchor Chain for marine farm mooring system, with diameter 16mm to 50mm, most used in European fish farming industry.
-
Anchor Shackle Type D End Shackle
An Anchor Shackle Type D End Shackle is a specific type of shackle used in marine applications, particularly for connecting anchor chains. It's a D-shaped fitting with a removable pin, designed to safely connect the anchor's standard shackle to the chain or to a rope with a thimble.
-
AC-14 HHP Casting Steel Stockless Anchor
AC-14 anchor is a stockless HHP anchor with a wide anchor crown, thick and long flukes, and longitudinal ribs.
-
AC-14 SB HHP Casting Anchor
The AC-14 SB HHP Casting Anchor is a high-holding-power anchor, specifically designed for marine applications. It's a stockless anchor with a design that provides excellent weight-to-performance ratios and can be used in various seabed conditions.
-
Spek Anchor Stockless Anchor
A ship Spek anchor, also known as a stockless anchor, is a common type of anchor used in commercial shipping and cruise vessels. It is designed with a compact, stockless design for easy handling and deployment, especially in shallow waters, and is known for its good holding power.
Deck Fittings
SME provides the good quality studless link anchor chain for sale, Certificate available for ABS, DNV GL, LR, CCS, BV, NK, KR, RMRS, RRR, BKI. Anchor Chain
-
NS2589 Bulwark Mounted Mooring Chock
The NS2589 bulwark chock is made of cast steel, and the surface is cleaned to SA2.5 in accordance with Swedish standard SIS 05 59 00, and is coated with a rust-proof primer. Therefore, the surface is very smooth, and with no burr or sharp edge, which helps to reduce the friction of mooring ropes.
-
NS2587 Bulwark Mounted Mooring Chock
NS2587 Bulwark Mounted Mooring Chock is a special type of hawse hole at a vessel’s bow, which is designed for temporary mooring. NS means Norsk standard or Norwegian Standard, a standard as JIS, DIN, GB, etc. This standard has four kinds of chocks NS2587.
-
ISO13728 Panama Chock
The ISO 13728 Panama Chock Type A is a robust steel fitting designed for safe and efficient mooring line handling on the deck of large ships. Manufactured from high-quality cast steel, it provides a designated pathway for mooring lines, ensuring smooth operation.
-
Bulwark EU Type Towing Chock
The bulwark towing chock also known as EU type towing chock is installed on the bulwark. The bulwark towing chock is the towing fittings applied for the towing purpose by towing lines.
-
German DIN81915 Panama Chock
A panama chock is a special type of hawse hole at a vessel's bow and designed as per the mooring requirements set by Panama Canal Authority.
-
T Head Type Dock Bollard
T Head Type Dock Bollard T Head bollard also can be called Tee head dock mooring bollard. The upon the side of the dock bollard is T head type, which can be different models according to the design of the dock.
-
Staghorn Bollard/Twin Horn Dock Bollard
Twin horn type bollard is one of the most commonly used type of dock bollard. Its’ special horn shape can help more effectively fasten the rope and avoid releasing. We can also supply other types of dock bollards: K head dock bollard, staghorn type bollard, T head dock bollard, J type dock bollard, R type dock bollard, single bitt bollard, etc.. If you are interested in our products, please contact us.
-
NS2585 Warping Roller Fairlead
NS2585 warping roller is the same as the GB/T 10105-88 fairlead. It is cast by the finest quality marine mild carbon steel for added durability. All surfaces in contact with the ropes shall be free from surface roughness or irregularities likely to cause damage to the ropes by abrasion. It has a high breaking load of a tightwire. The compact design, precision machined smooth surface and easily removable shafts ensure the good wear and corrosion resistance of the fairlead.
-
ISO13755 Warping Roller Fairlead
The foundation of the warping roller shall be determined by the manufacturer in accordance with the standard of ISO13755. The roller fairlead is made from steel casting having a yield point of not less than 205N/mm2 or steel plates having a yield point of not less than 235 N/mm2 and the Axl is made from weldable steel casting having a yield point of not less than 350N/mm2 or equivalent.
-
DIN 81906 Warping Roller
A DIN 81906 warping roller, also known as a fairlead roller, is a marine device used to guide mooring ropes or cables on ships. It's designed to change the direction of the rope and facilitate secure docking or anchoring. The fairlead roller typically consists of a cast steel or cast iron roller mounted on a pedestal or directly on the deck.
-
Single Roller Fairlead With Socket Type B
Single Roller Fairlead with Socket is a heavy-duty piece of equipment designed for the harsh environment of boats and ships. It functions similarly to its land-based counterpart, guiding and supporting ropes, lines, and cables while they’re under tension.
-
Single Roller Fairlead With Socket Type A
Single Roller Fairlead with Socket is a heavy-duty piece of equipment designed for the harsh environment of boats and ships. It functions similarly to its land-based counterpart, guiding and supporting ropes, lines, and cables while they’re under tension.
